Users Guide

148 Using and Configuring Virtual Media
When I performed a firmware update remotely
using the DRAC 5 Web-based interface, my
virtual drives at the server were removed. Why?
Firmware updates cause the DRAC 5 to reset, drop the remote
connection, and unmount the virtual drives. The drives will
reappear when the DRAC reset is complete.
When enabling or disabling the Virtual Flash, I
noticed that all my virtual drives disappeared and
then reappeared. Why?
Disabling or enabling the Virtual Flash causes a USB reset and
causes all virtual drives to detach from and then reattach to the
USB bus.
Table 8-2. Using Virtual Media: Frequently Asked Questions (continued)
Question Answer