Release Notes

file:///T|/htdocs/SOFTWARE/smdrac3/drac5/OM5.1/en/readme/DRAC5OM51_readme.txt[10/29/2012 2:54:30 PM]
A: Firmware updates cause the DRAC 5 to reset, drop the remote
connection, and unmount the virtual drives. The drives will
reappear when the DRAC reset is complete.
Q: When enabling or disabling the Virtual Flash, I noticed that all my
virtual drives disappeared and then reappeared. Why?
A: Disabling or enabling the Virtual Flash causes a USB reset and
causes all virtual drives to detach from and then re-attach to the
USB bus.
Q: Sometimes I notice my Virtual Media client connection drop. Why?
A: When a network timeout occurs, the DRAC 5 firmware drops the
connection, disconnecting the link between the server and the
Virtual Drive. To reconnect to the Virtual Drive, use the Virtual
Media feature.
######################################################################
Information in this document is subject to change without notice.
(C) 2006 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission
of Dell Inc. is strictly forbidden.
Trademarks used in this text: "Dell", "Dell OpenManage",
and "PowerEdge" are trademarks of Dell Inc.; "Microsoft", "Windows",
and "Windows Server" are registered trademarks of Microsoft
Corporation; "SUSE" is a registered trademark of Novell, Inc.;
"Red Hat" is a registered trademark of Red Hat, Inc.
Other trademarks and trade names may be used in this document to refer
to either the entities claiming the marks and names or their products.
Dell Inc. disclaims any proprietary interest in trademarks and trade
names other than its own.
July 2006