Users Guide

40 Installing and Setting Up the DRAC 5
If IPMI serial is in terminal mode, you can configure the following additional settings using
racadm config cfgIpmiSerial commands:
• Delete control
• Echo control
• Line edit
• New line sequences
• Input new line sequences
For more information about these properties, see the IPMI 2.0 specification.
Configuring Platform Events
Platform event configuration provides a mechanism for configuring the remote access device to perform
selected actions on certain event messages. These actions include reboot, power cycle, power off, and
triggering an alert (Platform Events Trap [PET] and/or e-mail).
The filterable Platform Events include the following:
• Fan Probe Failure
• Battery Probe Warning
• Battery Probe Failure
• Discrete Voltage Probe Failure
• Temperature Probe Warning
• Temperature Probe Failure
• Chassis Intrusion Detected
• Redundancy Degraded
• Redundancy Lost
• Processor Warning
• Processor Failure
• Processor Absent
• PS/VRM/D2D Warning
• PS/VRM/D2D Failure
• Power Supply Absent
• Hardware Log Failure
• Automatic System Recovery