Users Guide

Installing and Setting Up the DRAC 4 43
NOTE: The DRAC 4 default user name is root and the default password is
calvin.
You can access the DRAC 4 Web-based interface through the DRAC 4 NIC
by using a supported Web browser, or through Server Administrator or
IT Assistant.
Accessing the DRAC 4 Using a Supported Web Browser
1 Open a Web browser window.
2 In the Address field, type the DRAC 4 IP address.
3 Log in with your DRAC 4 user name and password.
The default user name and password are
root and calvin , respectively.
See the remote access interface online help for more information.
Accessing the DRAC 4 Using Server Administrator
1 Launch Server Administrator.
2 In the Server Administrator home page system tree in the left window
pane, click
System → Main System Chassis → Remote Access Controller .
See your Server Administrator User’s Guide for more information about using
the Server Administrator remote access features.
Telnet Console Provides access through the DRAC 4 to the server COM1
port, video, and hardware management interfaces through
the DRAC 4 NIC and provides support for serial and racadm
commands including powerdown, powerup, powercycle,
hardreset, graceshutdown, and gracereboot commands.
SSH Interface Provides the same capabilities as the telnet console using an
encrypted transport layer for higher security.
Terminal Emulation
Software
Provides access through the DRAC 4 to the server COM1
port and hardware management interfaces through the serial
connector. The terminal emulation software provides support
for serial and racadm commands including powerdown,
powerup, powercycle, hardreset, graceshutdown, and
gracereboot commands.
Table 2-2. DRAC 4 Interfaces (continued)
Interface Description