Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerDRAC4 Version 1.70
31323334353637383940
38 Installing and Setting Up the DRAC 4
LAN Speed
Setting
Indicates the DRAC 4 NIC communications speed.
The available settings are 10 Base-T and 100 Base-T. 10 Base-T
represents a communication speed of 10 Mb per second. 100
Base-T represents a speed of 100 Mb per second. Press <s> to
toggle this setting. This option is not available when the Auto
Negotiate setting is enabled.
LAN Duplex
Setting
Indicates the DRAC 4 NIC duplex setting. The available
settings are Half Duplex and Full Duplex. When set to Half
Duplex, the NIC communicates in one direction at a time,
indicating that the NIC can only receive or transmit
information at any given moment. When set to Full Duplex,
the NIC communicates in both directions simultaneously. Press
<x> to toggle to this setting. This option is not available when
the Auto Negotiate setting is enabled.
DNS Configuration Options
Servers from
DHCP
The available settings are Disabled and Enabled. Press <u> to
toggle the setting. The default setting is Disabled, which
indicates that the DRAC 4 is using preset static IP addresses.
When this option is selected, the DHCP server provides the
DNS server IP addresses.
If Use DHCP (described earlier in this table) is set to Disabled,
this option is grayed out and you cannot modify this field.
Static DNS
Server 1:
Indicates the preset static IP address of the first DNS server that
the DRAC 4 uses if Servers from DHCP is disabled. The default
is 192.168.0.5. Press <1> to change this address. If Servers from
DHCP is Enabled, this option is grayed out and you cannot
modify this field.
Static DNS
Server 2:
Indicates the preset static IP address of the second DNS server
that the DRAC 4 uses if Servers from DHCP is disabled. The
default is 192.168.0.6. Press <2> to change this address. If you
do not have a second DNS server, you may enter 0.0.0.0 for the
IP address. If Servers from DHCP is Enabled, this option is
grayed out and you cannot modify this field.
Table 2-1. DRAC 4 IDE Option ROM Utility Properties (continued)
Properties Description