Users Guide

Installing and Setting Up the DRAC 4 35
Configuring DRAC 4 Properties
You can configure all of the DRAC 4 properties (network, users, alerts, etc.)
using the Web-based interface, or racadm CLI.
For more information about how to use the Web-based interface, see
"Accessing the Web-Based Interface." For more information about how to
use the racadm CLI through a serial or telnet see "Using the Serial and
racadm Commands."
Configuring the DRAC 4 Network Settings
CAUTION: Changing your DRAC 4 Network settings may disconnect your current
network connection.
Configure the DRAC 4 network settings using one of the following tools:
• Option ROM — See "Configuring the DRAC 4 Network Settings Using
the Option ROM."
• Web-based Interface — See "Configuring the DRAC 4 NIC."
• racadm CLI — See "cfgLanNetworking."
NOTE: If you are deploying the DRAC 4 in a Red Hat Enterprise Linux environment,
see "Installing the racadm CLI on a Red Hat Enterprise Linux Management Station."