Users Guide

30 Installing and Setting Up the DRAC 4
To install the racadm CLI utility:
1
Log on as root to the system where you want to install the management
station components.
2 If necessary, mount the Dell Systems Management Tools and
Documentation
DVD using the following command or a similar command:
mount /media/cdrom
3
Navigate to the SYSMGMT/ManagementStation/linux/rac/linux/rac
directory and type the following command:
rpm -ivh *.rpm
For help with the racadm command, type the man racadm or racadm help
command after issuing the previous commands. For more information about
the racadm CLI, see "Using the Serial and racadm Commands."
Uninstalling the racadm CLI on a Red Hat Enterprise Linux
Management Station
You can uninstall the racadm CLI by typing the following command:
rpm -e <racadm_package_name>
where
<racadm_package_name> is the rpm package that was used to
install the RAC software.
Configuring a Supported Web Browser
The following sections provide instructions for configuring the supported
Web browsers. For a list of supported Web browsers, see the Dell Systems
Software Support Matrix on the Dell Support website at support.dell.com.
Configuring Your Web Browser to Connect to the Web-Based Interface
If you are connecting to the DRAC 4 Web-based interface from a
management station that connects to the Internet through a proxy server, you
must configure the Web browser to access the Internet from this server.