Users Guide

DRAC 4 Property Database Group and Object Definitions 251
cfgNetTuning
The group contains parameters to tune the DRAC 4 network configuration.
One instance of the group is allowed. All objects in this group require a
DRAC 4 reset before they become active. The following subsections describe
the objects in this group.
cfgNetTuningNicAutoneg (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 4 permission.
Legal Values
1 or 0
Default
1
Description
Enables autonegotiation of physical link speed and duplex. If enabled,
autonegotiation takes priority over values set in the cfgNetTuningNic100MB
and cfgNetTuningNicFullDuplex objects.
cfgNetTuningNic100MB (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 4 permission.
Legal Values
1 or 0
Default
1
Description
Sets the DRAC 4 link speed to 100 Mbit (1) or 10 Mbit (0).
cfgNetTuningNicFullDuplex (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 4 permission.