Users Guide

218 racadm Subcommand Man Pages
Examples
• racadm setrac -d — Only the parameter values are displayed.
•
racadm setrac -h — The UTC time and managed system name are taken
from the managed system and written to the DRAC 4.
sslcsrgen
NOTE: To use this command, you must have Configure DRAC 4 permission.
Table A-34 describes the sslcsrgen subcommand.
Synopsis
racadm sslcsrgen [-g] [-u] [-f < filename >]
racadm sslcsrgen -s
Description
The sslcsrgen subcommand is used to generate the CSR and download it to a
file, <filename>.
Options
NOTE: The -u and -f options are not supported for the serial/telnet console.
Table A-35 describes the sslcsrgen subcommand options.
Table A-34. sslcsrgen
Subcommand Description
sslcsrgen Generates and downloads the SSL CSR.