Users Guide

Using the Serial and racadm Commands 183
When I use the racadm
commands and subcommands,
I get errors that I don’t
understand.
You may encounter one or more of the following
errors when using the racadm commands and
subcommands:
• Local error messages — Occur when problems
occur with syntax, typographical errors, incorrect
names, and so on.
Example:
racadm <subcmd>: ERROR:
<message>
• Transport error messages — Occur when the
racadm CLI communication paths to the DRAC
4 are not accessible. Transport error messages
occur if Server Administrator is not running
when the command is executed.
If you are using the racadm CLI remotely,
transport error messages may indicate network
communication problems or that the
management station is unable to communicate
with the DRAC 4.
Example:
racadm <subcmd> : Transport :
ERROR : <message>
• DRAC 4 firmware errors — Occur when a fault
exists in the DRAC 4 firmware operation.
Example:
racadm <subcmd> : Firmware :
ERROR : <message>
Table 8-6. Using the serial and racadm Commands: Frequently Asked
Questions (continued)
Question Answer