Users Guide

170 Using the Serial and racadm Commands
Table 8-5. racadm Subcommands
Command Description
help Lists DRAC 4 subcommands.
help
<subcommand>
Lists usage statement for the specified subcommand.
clearasrscreen Clears the last System Reset Timer screen (last blue screen).
config/getconfig Configures the DRAC 4 and displays the DRAC 4
configuration.
coredump Displays the last DRAC 4 coredump.
coredumpdelete Deletes the coredump stored in the DRAC 4.
fwupdate Executes or displays status on DRAC 4 firmware updates.
getssninfo Displays information about active sessions.
getsysinfo Displays general DRAC 4 and system information.
getractime Displays the DRAC 4 time.
ifconfig Sets or displays the current DRAC 4 IP configuration.
getsvctag Displays service tags.
racdump Dumps DRAC 4 status and state information for debug.
racreset Resets the DRAC 4.
racresetcfg Resets the DRAC 4 to the default configuration.
serveraction Executes a graceful hard server reset, power-on, power-off, or
power-cycle.
setrac Sets managed system name, operating system name, and type
from the managed system to the DRAC 4.
sslcsrgen Generates and downloads the secure sockets layer (SSL)
certificate signing request (CSR).
sslcertupload Uploads a CA certificate or server certificate to the DRAC 4.
sslcertdownload Downloads a CA certificate.
sslcertview Views a CA certificate or server certificate in the DRAC 4.