Manualshelf

Release Notes

ManualsBrandsDell ManualsActive System ManagerDRAC4 Version 1.70
12345678910
file:///T|/htdocs/SOFTWARE/smdrac3/drac4/170/en/readme/readme.txt[10/26/2012 8:38:00 AM]
(150993)
* The DRAC 4 software requires APIC mode on the server. PIC mode is
not supported. (149034)
* When you make an initial connection to the DRAC 4 through
SSH but have not yet authenticated, other users are prevented
from connecting to the single DRAC 4 SSH session until the
initial connection is dropped or after the timeout. The initial
connection is dropped after a failed login attempt or in
approximately 30 seconds if an authentication is not attempted.
(150493)
* When connecting to a remote DRAC 4 using a Firefox Web browser on
a Red Hat Enterprise Linux 5 (x86_64) or SUSE Linux Enterprise
Server 9 with Update 3 (x86_64) or 10 (x86_64) Gold, the Virtual
Media feature may not be available. The browser displays the
error:
"Virtual Media Plug-in is not installed or running."
This is because the browser is detecting the 64-bit OS rather than
the Firefox bit-ness. Since the Virtual Media plug-in is not
supported on a 64-bit browser, this check prevents installation
of the Virtual Media plug-in.
Do the following to manually install the plug-in:
1. Download the 32-bit version of Firefox and install it on your
home directory.
2. From the command prompt go to the location where you have
installed Firefox and launch Firefox from there.
3. Log in to DRAC 4 and navigate to the "Properties" page.
4. Change the Web address in the browser window from
"https://<DRAC4-IP-address>/cgi/main" to
"https://<DRAC4-IP-address>/rac4vm.xpi," and press Enter.
Firefox prompts you with an "Opening rac4vm.xpi" dialog,
allowing you to save the file to your local file system.
5. Click "OK" and save the file to a temporary location (for
example: /tmp/rac4vm.xpi).
6. Log out of the DRAC 4, and then specify the Web address of the
"rac4vm.xpi" file (for example: file:///tmp/rac4vm.xpi).
7. Firefox displays the "Software Installation" dialog.
Click the "Install" button to continue.
8. After installation completes, close the browser, and delete
the "/tmp/rac4vm.xpi" file.