Users Guide

94 Managing and Recovering a Remote System
NOTE: Due to fluctuations in the watchdog timer, the Last Crash Screen has a
higher probability of not being captured when the System Reset Timer is set to a
value less than 30 seconds. Use Server Administrator or IT Assistant to set the
System Reset Timer to at least 30 seconds to ensure that the Last Crash Screen
functions properly. See "Configuring the Managed System to Capture the Last Crash
Screen" for additional information.
Using the Diagnostic Console
The DRAC 4 provides a standard set of network diagnostic tools, similar to
those found on Microsoft Windows or Red Hat Enterprise Linux-based
systems. Using the DRAC 4 Web-based interface, you can access the
following network debugging tools by clicking the Diagnostics tab.
The Diagnostic Console allows you to perform debugging tasks and paging.
Table 4-28 shows the options that are available on the Diagnostic Console page.
NOTE: After entering one of the following commands, click Submit. The results of
the debugging tasks are displayed in the Results of the Diagnostic Command box at
the bottom of the page.
Table 4-27. Last Crash Screen Page Buttons
Button Action
Print Prints the Last Crash Screen page.
Save As Opens a pop-up window that enables you to save the Last Crash
Screen to a directory of your choice.
Refresh Reloads the Last Crash Screen page.
Delete Last Crash
Screen
Deletes the Last Crash Screen page.