Users Guide

Installing and Setting Up the DRAC 4 45
You can access the DRAC 4 Web-based interface through the DRAC 4 NIC
by using a supported Web browser, or through Server Administrator or
IT Assistant.
Accessing the DRAC 4 Using a Supported Web Browser
1 Open a Web browser window.
2 In the Address field, type the DRAC 4 IP address.
3 Log in with your DRAC 4 user name and password.
The default user name and password are
root and calvin , respectively.
See the remote access interface online help for more information.
Accessing the DRAC 4 Using Server Administrator
1 Launch Server Administrator.
2 In the Server Administrator home page system tree in the left window
pane, click
System → Main System Chassis → Remote Access Controller .
See your Server Administrator User’s Guide for more information about using
the Server Administrator remote access features.
Accessing the DRAC 4 Using racadm CLI
See "Using the Serial and racadm Commands" for information about
accessing the DRAC 4 using the racadm CLI.
DRAC 4 Software Basics for Red Hat
Enterprise Linux
The DRAC 4 is supported on precompiled kernels that are a part of the Red
Hat Enterprise Linux distribution. The DRAC 4 is not supported on
recompiled kernels with other configuration options (for example, kernels
configured for performance-tuning purposes).
NOTICE: Red Hat Enterprise Linux may fail to load when started on recompiled
kernels. If this situation occurs, you must either restore the kernel and modules
from backup, or you must reinstall the kernel from the Red Hat Package
Manager (RPM).