Users Guide

Installing and Setting Up the DRAC 4 43
• Repair utility (diskette-based update): This update restores all DRAC 4
configurations back to factory defaults. Go to the Dell Support website at
support.dell.com , download the appropriate DRAC 4 firmware image file,
and follow the instructions to create two diskettes. Insert the first diskette
into the system to be updated and follow the instructions on the screen.
NOTICE: The Repair utility is only supported when used locally.
After you perform a firmware upgrade, perform the following instructions to
clear the Web browser cache to ensure that all new Web-based interface
pages are loaded.
Clearing the Web Browser Cache With Internet Explorer
1 From the drop-down menu, select Tools → Internet Options .
2 In the Internet Options window under Temporary Internet Files , click
Delete Files.
3 Click the Delete all offline content box.
4 Click OK twice.
5 Close and restart the browser.
Clearing the Web Browser Cache With Mozilla
1 From the drop-down menu, select Edit Preferences .
2 In the Preferences window, select Advance → Cache .
3 Click Clear Disk Cache .
4 Click Clear Memory Cache .
5 Click OK .
6 Close and restart the browser.
Accessing the DRAC 4 Through a Network
This section provides information about how to access the DRAC 4 after you
install the hardware and configure the software.
After you configure the DRAC 4, you can remotely access the managed
system using one of the DRAC 4 interfaces listed in Table 2-2.