Users Guide

Installing and Setting Up the DRAC 4 41

When finished, do one of the following:

• Press <Esc> to cancel all changes and exit the

Setup

menu.

• Press <r> to save the changes and reboot the DRAC 4.

The following message appears:

IMPORTANT: In order for your changes to take

effect, they need to be saved. Your computer will

then continue booting normally.

Would you like to save the changes and continue

now (<Y> or <N>)?

Or if Virtual Media settings have changed, the following message appears:

IMPORTANT: In order for your changes to take

effect, they need

to be saved. For Virtual Media settings to take

effect, a reboot is required.

Would you like to save the changes and reboot now

(<Y> or <N>)?

Static Domain

Name

The default setting is Disabled. The default static domain name

is MYDOMAIN. Press <f> to toggle the setting. When this

option is selected, the static domain name is displayed. You can

modify the domain name only when toggling from the Disabled

setting by pressing <f>. However, if Use DHCP (described

earlier in this table) is set to Disabled, you cannot set Static

Domain Name to Disabled. If Register RAC Name is Disabled,

this option is grayed out and you cannot modify this field.

Virtual Media Configuration Options

Virtual Media is:

Indicates whether Virtual Media is enabled or disabled.

Press <e> to toggle the setting.

Table 2-1. DRAC 4 IDE Option ROM Utility Properties

(continued)

Properties Description