Users Guide

Installing and Setting Up the DRAC 4 39
DNS Current
Configuration
Displays the current IP address assigned to the DHCP server.
NIC TCP/IP Configuration Options
Use DHCP is: Indicates whether the DHCP system has assigned the DRAC 4
IP address or whether the DRAC 4 is using a preset static IP
address. The available settings are Enabled and Disabled. Press
<d> to toggle the setting. When this option is selected, the
other options in this group are grayed out.
Static IP-Addr Indicates the preset static DRAC 4 IP address if DHCP is
disabled. The default address is 192.168.0.120. Press <i> to
change this address.
Static Netmask Indicates the preset static masked DRAC 4 IP address if DHCP
is disabled. The default is 255.255.255.0. Press <n> to change
this mask.
Static Gateway Indicates the preset static gateway (router or switch address) of
the DRAC 4 address if DHCP is disabled. The default is
192.168.0.1. Press <g> to change the address.
Ethernet Configuration Options
NIC is: Indicates whether the DRAC 4 NIC setting is Enabled or
Disabled. Press <e> to toggle the setting. When selected, the
DRAC 4 NIC can be used for remote access. You must select
this option to be able to configure the remaining options on
this screen.
Auto-Negotiate
is:
Indicates whether the DRAC 4 automatically configures LAN
speed and duplex settings. The available settings are Enabled
and Disabled. If this option is not selected, the user settings are
used. Press <a> to toggle the setting.
LAN Speed
Setting
Indicates the DRAC 4 NIC communications speed. The
available settings are 10 Base-T and 100 Base-T. 10 Base-T
represents a communication speed of 10 Mb per second. 100
Base-T represents a speed of 100 Mb per second. Press <s> to
toggle this setting. This option is not available when the Auto
Negotiate setting is enabled.
Table 2-1. DRAC 4 IDE Option ROM Utility Properties
(continued)
Properties Description