Users Guide

Installing and Setting Up the DRAC 4 37

Ensure that your updated JRE software is installed and registered on your

system.

Open a Mozilla Web browser window.

In the Web browser window, click

Tools

and select

Web

Development

→

Java Console

The JRE version is displayed at the top of the

Java Console

window.

If the version that is shown is not the same as the version you

downloaded or if the Java Console menu option is grayed out, the

software is not registered.

Configuring DRAC 4 Properties

You can configure all of the DRAC 4 properties (network, users, alerts, etc.)

using the Web-based interface, or racadm CLI.

For more information about how to use the Web-based interface, see

"Accessing the Web-Based Interface." For more information about how to use

the racadm CLI through a serial or telnet see "Using the Serial and racadm

Commands."

Configuring the DRAC 4 Network Settings

NOTICE: Changing your DRAC 4 Network settings may disconnect your current

network connection.

Configure the DRAC 4 network settings using one of the following tools:

• Option ROM — See "Configuring the DRAC 4 Network Settings Using

the Option ROM."

• Web-based Interface — See "Configuring the DRAC 4 NIC."

• racadm CLI — See "cfgLanNetworking."

NOTE: If you are deploying the DRAC 4 in a Red Hat Enterprise Linux environment,

see "Installing the racadm CLI on a Red Hat Enterprise Linux Management Station."