Users Guide

DRAC 4 Property Database Group and Object Definitions 273
Event Filter Operation and Event Mask Properties
The DRAC 4 alert filter scans the alert enable database properties before it
scans the event masks. (An event mask is a bit sequence that specifies
information about the DRAC 4- or managed-system-generated event, such as
the event’s origin, type, and severity).
NOTE: Throughout this document, objects are always referred to by group name
and object name, separated by a space.
The DRAC 4 alert filter operates according to the following general steps:
• The DRAC 4 alert filter scans all of the objects in the alert enable property
group
ID is cfgUserAdmin . The object ID for this group is:
–cfgUserAdmin cfgUserAdminPageEmailEnable
If this object’s property values is TRUE , it scans the event masks in the
User table.
• The DRAC 4 alert filter scans the
cfgTraps cfgTrapsEnable object. If this
object’s property value is
TRUE , it scans the event masks in the Traps
table.
The following subsections describe the event masks for DRAC 4-generated
events and managed-system-generated events defined in the User table and
the Trap table.
DRAC 4-Generated Event Mask Definitions
The cfgUserAdmin cfgUserdminAlertFilter {Rac, Sys} EventMask
properties are an unsigned 32-bit integer property that holds the filter
information for DRAC 4-generated events. The bit definitions in Table B-4
apply.
Access Console Redirection 0x00000020
Access Virtual Media 0x00000040
Test Alerts 0x00000080
Execute Debug Commands 0x00000100
Table B-3. Bit Masks for Role Group Privileges
(continued)
Role Group Privilege Bit Mask