Users Guide

256 DRAC 4 Property Database Group and Object Definitions
racadm config -g cfgNetTuning -o
cfgNetTuningTcpReXmtMin <value>
racadm config -g cfgNetTuning -o
cfgNetTuningTcpReXmtMax <value>
racadm config -g cfgNetTuning -o cfgNetTuningTcpMsl
<value>
where <value> is obtained from Table B-2.
NOTICE: Although you can configure these parameters, it is recommended that
you only use the settings described here. Other settings may adversely effect the
DRAC 4's ability to communicate with other network nodes.
Following the modification of the network tuning, the DRAC 4 must be reset
for the new tuning values to take effect. After the DRAC 4 has been reset, it
should be available for use in a normal or satellite network configuration.
Table B-2. DRAC 4 Properties for Satellite Connectivity
Property Normal Value Satellite Value
cfgNetTuningNicMtu 0x5dc 0x1f4
cfgNetTuningIpTtl 0x40 0x80
cfgNetTuningIpReassTtl 0x3c 0x78
cfgNetTuningTcpSrttBa
se
0 0x100
cfgNetTuningTcpSrttDf
lt
0x6 0x180
cfgNetTuningTcpReXm
tMin
00
cfgNetTuningTcpReXm
tMax
0x80 0x400
cfgNetTuningTcpMsl 0x3c 0xf0