Users Guide

212 racadm Subcommand Man Pages
serveraction
NOTE: To use this command, you must have Execute Server Control Commands
permission.
Table A-27 describes the serveraction subcommand.
Synopsis
racadm serveraction [-d <delay>] <action>
Description
The serveraction command provides an interface to control system reset and
power control. Table A-28 describes the serveraction subcommand option
values.
Output
The serveraction command returns without output if successful.
Table A-27. serveraction
Subcommand Definition
serveraction Executes a managed system reset or power-
on/off/cycle.
Table A-28. serveraction Subcommand Options
String Definition
<action> Specifies the action. The options for the <action> string are:
• powerdown — Powers down the system.
•
powerup — Powers up the system.
•
powercycle — Issues a power-cycle to the system.
•
hardreset — Issues a hard reset to the system.
•
graceshutdown — Powers down the system gracefully.
•
gracereboot — Powers down the system gracefully (same as the
graceshutdown option)
<delay> Specifies the time in seconds after the command is received before
the action is executed. The default is 1 second.