Users Guide

racadm Subcommand Man Pages 193
coredump
NOTE: To use this command, you must have Execute Debug Commands
permission.
Table A-7 describes the coredump subcommand.
Synopsis
racadm coredump
Description
The coredump subcommand displays detailed information, including register
values, recorded when the most recent bus error occurred, or the message No
CORE dump available (if a previous bus error has not occurred, or if the
data has been cleared).
This bus error information is persistent across power cycles of the DRAC 4—
the data remains in the flash memory of the DRAC 4 until either:
• It is cleared using the coredumpdelete subcommand.
• Another bus error occurs, replacing the previous information with the
more recent bus error information.
See the coredumpdelete subcommand for information about deleting this
information.
Output Example
FW d_cmdCoreDump:
Last CORE dump at Wed, 23 Oct 2004 15:49:41 GMT-05:00
Data Access Abort Running: 'IPEV' -#005E0000
-----------------------------------------------------
----------
CPSR = A0000013 (NzCv if SVC32) SP =018616DC LR =
01023C34
Table A-7. coredump
Subcommand Definition
coredump Displays the last DRAC 4 core dump.