Users Guide

192 racadm Subcommand Man Pages
Output
This subcommand generates error output upon encountering either of the
following:
• Invalid syntax, group name, object name, index, or other invalid database
members
• racadm CLI transport failures
If errors are not encountered, this subcommand displays the contents of the
specified configuration.
Examples
• racadm getconfig -g cfgLanNetworking — Displays all of the
configuration parameters (objects) that are contained in the group
cfgLanNetworking .
•
racadm config -g cfgLanNetworking -o cfgNicIpAddress 10.35.10.100 —
Sets the cfgNicIpAddress configuration parameter (object) to the value
10.35.10.110. This IP address object is contained in the group
cfgLanNetworking .
•
racadm getconfig -f myrac.cfg — Writes all of the configuration objects,
from all of the DRAC 4 group configuration parameters, in to
myrac.cfg .
•
racadm config -f myrac.cfg — Configures or reconfigures the DRAC 4.
The
myrac.cfg file may be created from the command specified in the
previous example if the DRAC 4 has a desired configuration to be
replicated. The
myrac.cfg file may also be edited manually as long as the
parsing rules are followed.
NOTE: The myrac.cfg file does not contain password information. To include
this information in the file, it must be input manually. If you want to remove
password information from the myrac.cfg file, use the -p option.
• racadm getconfig -h — Displays a list of the available configuration groups
on the DRAC 4.
•
racadm getconfig -u root — Displays the configuration parameters for the
user named root.