Users Guide

Using the Serial and racadm Commands 183
When I use the racadm commands and
subcommands, I get errors that I don’t
understand.
You may encounter one or more of the
following errors when using the racadm
commands and subcommands:
• Local error messages — Occur when
problems occur with syntax,
typographical errors, incorrect names,
and so on.
Example:
racadm <subcmd>: ERROR:
<message>
• Transport error messages — Occur
when the racadm CLI communication
paths to the DRAC 4 are not
accessible. Transport error messages
occur if Server Administrator is not
running when the command is
executed.
If you are using the racadm CLI
remotely, transport error messages may
indicate network communication
problems or that the management
station is unable to communicate with
the DRAC 4.
Example:
racadm <subcmd> :
Transport : ERROR :
<message>
• DRAC 4 firmware errors — Occur
when a fault exists in the DRAC 4
firmware operation.
Example:
racadm <subcmd> :
Firmware : ERROR :
<message>
Table 8-6. Using the serial and racadm Commands: Frequently Asked
Questions
(continued)
Question Answer