Users Guide

Using the DRAC 4 With Microsoft Active Directory 121
Adding Privileges
1 Select the Privileges Object tab and click Add .
2 Type the Privilege Object name and click OK .
Click the Products tab to add one or more RAC devices to the association.
The associated devices specify the RAC devices connected to the network
that are available for the defined users or user groups. Multiple RAC devices
can be added to an association object.
Adding RAC Devices or RAC Device Groups
1 Select the Products tab and click Add.
2 Type the RAC device or RAC device group name and click OK .
3 In the Properties window, click Apply and then OK .
Configuring the DRAC 4 with Extended Schema Active Directory and
the Web-Based Interface
NOTE: If you are using Standard Schema with Active Directory, the DRAC 4 Name
and DRAC 4 Domain Name fields are unavailable.
1 Open a supported Web browser. See "Supported Web Browsers."
2 Log in to the Web-based interface using the default user, root, and
password.
3 Click the Configuration tab and select Active Directory .
4 On the Active Directory Configuration page, select the Enable Active
Directory
check box.
5 Typ e th e DRAC 4 Name .
This name must be the same as the common name of the RAC object you
created in your Domain Controller (see step 3 of "Creating a RAC Device
Object").
6 Typ e th e Root Domain Name . The Root Domain Name is the fully
qualified root domain name for the forest.
7 Typ e th e DRAC 4 Domain Name (for example, drac4.com ). Do not use
the NetBIOS name.
The
DRAC 4 Domain Name is the fully qualified domain name of the
sub-domain where the RAC Device Object is located.