Release Notes

file:///T|/htdocs/SOFTWARE/smdrac3/drac4/160/en/readme/readme.txt[10/26/2012 9:58:48 AM]
2. From the "Control Center" menu, select "Peripherals."
3. From the "Peripherals" menu select "Keyboard."
4. The keyboard control menu permits changing keyboard repeat
delay (660 msec default) and Rate (25/s default). (75032)
* After installing Dell Remote Access Controller 4 software on
Windows Server 2003 x64 Editions, the device manager may show a
warning state (yellow bangs) for two devices. To change the state
of these devices to Normal, perform the following steps:
1. Right-click the device and choose "Update driver."
2. In the "Hardware Update Wizard" you are provided the option
"Can Windows connect to Windows Update to search for software?
Choose "No, not at this time" and click "Next".
3. At the prompt "What do you want the wizard to do?" choose
"Install from a list or specific location (Advanced)" and
click "next".
4. At the prompt "Please choose your search and installation
options" select "search for the best driver in these
locations" and check "Include this location in the search:".
5. Browse for the selected driver in the /RAC4 path, typically
"c:\program files (x86)\dell\sysmgt\rac4\rac4ser.inf". The
driver will load and the device will be identified as RAC PCI
function.
6. Click on "finish" to complete the Hardware update.
Repeat the same steps for the other device with the warning
state. (32223)
* When a DRAC console redirection has opened a session on the same
system locally, then you will have infinite occurrences appear.
To avoid this do not try to open a DRAC console redirection
session to the system locally. (85029)
* The Virtual Media page via the GUI represents the current status
of that particular GUI session. This does not show if there is
already an existing Virtual Media session active via another GUI
session or the VM-CLI tool (racvmcli). If a connection is
attempted in such a scenario, the connection will fail.
Likewise if a Virtual Media session is already established
via the GUI, an attempt to connect via the VM-CLI tool
will result in a failed connection error message. (106508)
* In Windows Vista, if the Internet Explorer Protected Mode is
"ON", then you will not be able to use any of the drives