Release Notes

file:///T|/htdocs/SOFTWARE/smdrac3/drac4/1.50/en/readme/readme.txt[10/26/2012 10:03:23 AM]
To change the keyboard delay with SUSE OS:
1. From the main K menu. (Circular green icon with the SUSE trade
mark.)
2. Select Control Center.
3. From the control center menu select Peripherals.
4. From the Peripherals menu select Keyboard.
5. The keyboard control menu permits changing keyboard repeat delay
(660 msec default) and Rate (25/s default). (75032)
* After installing Dell Remote Access Controller 4 software on
Windows Server 2003 x64 Editions, the device manager may show a
warning state (yellow bangs) for two devices. To change the state
of these devices to Normal, perform the following steps:
1. Right-click the device and choose "Update driver."
2. In the "Hardware Update Wizard" you are provided the option "Can
Windows connect to Windows Update to search for software? Choose
"No, not at this time" and click "Next".
3. At the prompt "What do you want the wizard to do?" choose
"Install from a list or specific location (Advanced)" and click
"next".
4. At the prompt "Please choose your search and installation
options" select "search for the best driver in these locations"
and check "Include this location in the search:".
5. Browse for the selected driver in the /RAC4 path, typically
"c:\program files (x86)\dell\sysmgt\rac4\rac4ser.inf". The
driver will load and the device will be identified as RAC PCI
function.
The value of can vary.
6. Click on "finish" to complete the Hardware update.
Repeat the same steps for the other device with the warning state.
(32223)
* When a DRAC console redirection has opened a session on the same
system locally, then you will have infinite occurrences appear. To
avoid this do not try to open a DRAC console redirection session to
the system locally. (85029)
* The Virtual Media page via the GUI represents the current status
of that particular GUI session. This does not show if there is
already an existing Virtual Media session active via another GUI
session or the VM-CLI tool (racvmcli). If a connection is attempted