Owners Manual

Next steps
1. If removed, install the front bezel.
2. Reconnect the peripherals and connect the system to the electrical outlet.
3. Turn on the system, including any attached peripherals.
Related tasks
Installing the optional front bezel
Related reference
Safety instructions
Inside the system
Figure 11. Inside the system
1.
cooling fan in the cooling fan assembly (6) 2. processor (2)
3. DIMMs (24) 4. internal USB port
5. hard drive backplane (back) 6. vFlash media slot
7. hard drive (2) (back) 8. power supply unit (2)
9. expansion card riser 3 10. network daughter card
11. expansion card riser 2 12. expansion card riser 1
13. hard drive backplane
60 Installing and removing system components