White Papers
Table Of Contents
- 1 Installing and configuring the DR Series system
- 2 Creating a disk-based target device on CA ARCserve
- 3 Creating a new backup job with the DR Series system as the target
- 4 Setting up DR native replication and restore from replication target
- 5 Setting up the DR Series system cleaner
- 6 Monitoring deduplication, compression, and performance
- A Creating a storage device for NFS
5 Setting Up the Dell™ DR Series System as a Backup Target on CA Arcserve | April 2015
1 Installing and configuring the DR Series system
1. Rack and cable the DR Series system, and power it on.
For more information, refer to the following topics in the
Dell DR Series System Administrator
Guide:
“iDRAC Connection”, “Logging in and Initializing the DR Series System”, and “Accessing
IDRAC6/Idrac7 Using RACADM.”
2. Log on to iDRAC using the default address 192.168.0.120, or the IP address assigned to the iDRAC
interface. Use the user name and password: “root/calvin”.
3. Launch the virtual console.