Release Notes

ID Issue Description Workaround/Solution
15908 All 6 interfaces for 1G option on the DR4100
system are not shown in GUI.
Corrected in the 2.1 release.
All interfaces are now
displayed in the GUI for
various configuration
options.
15943 The contact information does not display in the
GUI after the submit button is clicked if mail relay
host is not configured.
Corrected in the 2.1 release.
Corrected the logic to not
send the notification if the
email relay host is not set.
15947 The wrong error message is displayed when
removing all the NTP servers from the GUI.
Corrected in the 2.1 release.
16262 A wrong command syntax is seen for the ost
--limit command
Corrected in the 2.1 release.
16322 For better support capability, ocafsd dumps on
diagnostics must be allowed.
Corrected in the 2.1 release.
16515 Pending bytes for replication must be displayed. Corrected in the 2.1 release.
Provided pending bytes in
the stats --
replication output.
16516 Extracting stack trace in the diagnostics bundle
functionality must be added for better support
diagnostics.
Corrected in the 2.1 release.
The functionality has been
added to the diagnostic
gathering routine.
16916 Replication fails due to the firewall packet
inspection and modification.
Corrected in the 2.1 release.
Added replication checksum
to all packets. The firewall
vendor can be engaged if
necessary to modify
inspection parameters for
replication traffic.
16963 Functionality required to change the behavior on
update to disable the root user if it is enabled.
During any upgrade, the root
user login is disabled (if it is
enabled) which is an
interface only Technical
Support uses.
17167 The title in a few of the disk usage graphs must be
made consistent with the others.
Corrected in the 2.1 release.
17184 Cannot install the BUE 32–bit plugin. Corrected in the 2.1 release.
10849,
11520,
11636,
7752,
14892,
Required support for Advanced Networking
feature to allow configuration of multiple
networks on a single unit.
Corrected in the 2.1 release.
30