Release Notes

ID Issue Description Workaround/Solution
18275 After upgrading your system, backup jobs failed
and containers became inaccessible due to the
DR Series system leaving the domain.
Corrected in the 3.0.0.1
release.
18215 If you created a CIFS user named root or service,
you could not delete it.
Corrected in the 3.0.0.1
release.
18151,
17997,
14534
Addition of additional DMA markers and changes
to marker code for the DMAs that need marker
detection.
The BridgeHead, Networker and Unix_Dump
markers must be set explicitly on a container and
are not part of the Auto marker option.
Corrected in the 3.0.0.1
release. The Auto setting
(default) will recognize
markers for the 2.X
supported DMACommVault|
TSM| ARCserve|
HP_DataProtector.
Newer Markers must be
explicitly set using the
appropriate selection
BridgeHead, Networker or
Unix_Dump.
18070 The command -system – -- show --hardware |
grep -i NIC does not list 1 Gb NICs if you have 10
Gb in the system.
Corrected in the 3.0.0.1
release.
18001 The - .bashrc is missing rda from the complete -F
line.
Corrected in the 3.0.0.1
release.
17999 During a system upgrade, the software upgrade
stopped because it exited the CLI shell.
A message has been added
instructing you to not
interrupt the upgrade
process.
17863 After upgrading your system, you are prompted to
reboot. The GUI will indicate that the reboot takes
up to 10 minutes, which is the best case scenario.
It can actually take up to 30 minutes, during which
time your user interface can appear frozen.
Corrected in the 3.0.0.1
release.
17796 When the total number of Domain Controllers is
very large, issues can occur when you try to add
the machine to the domain.
Corrected in the 3.0.0.1
release.
17702
The RDS plug-in download page does not list the
hybrid installer for the Windows operating
system. It only lists the individual installers for the
32- bit and 64-bit platforms.
Corrected in the 3.0.0.1
release.
17672 You are unable to change default NetVault RDA
password from the GUI when you use the system
for the first time and no clients are connected.
Corrected in the 3.0.0.1
release.
17660 You get a platform not supported error when you
upgrade the SUSE 11 NVBU plug-in from 32–bit to
64–bit on the same system.
Corrected in the 3.0.0.1
release.
26