Reference Guide

64 bytes from 10.25.19.5: icmp_seq=4 ttl=64 time=0.041 ms
64 bytes from 10.25.19.5: icmp_seq=5 ttl=64 time=0.049 ms
--- 10.25.19.5 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 3999ms
rtt min/avg/max/mdev = 0.039/0.043/0.049/0.009 ms
Other Command Options
--tries
Specify the number of ping attempts by entering a value using the DR Series system CLI --tries command option.
Example
network --ping --destination 10.25.19.5 --tries 3
PING 10.25.19.5 (10.25.19.5) from 10.20.14.15 bond0: 56(84) bytes of data.
64 bytes from 10.25.19.5: icmp_seq=1 ttl=64 time=0.032 ms
64 bytes from 10.25.19.5: icmp_seq=2 ttl=64 time=0.049 ms
64 bytes from 10.25.19.5: icmp_seq=3 ttl=64 time=0.047 ms
--- 10.25.19.5 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 5999ms
rtt min/avg/max/mdev = 0.032/0.043/0.049/0.005 ms
--size
Specify a desired ping packet size by entering a value using the DR Series system CLI --size command option.
Example
network --ping --destination system-69 --size 35
PING 10.20.19.20 (10.20.19.20) from myDR4000 bond0: 35(63) bytes of data.
43 bytes from 10.20.19.20: icmp_seq=1 ttl=64 time=0.129 ms
43 bytes from 10.20.19.20): icmp_seq=2 ttl=64 time=0.163 ms
43 bytes from 10.20.19.20: icmp_seq=3 ttl=64 time=0.166 ms
43 bytes from 10.20.19.20: icmp_seq=4 ttl=64 time=0.237 ms
43 bytes from 10.20.19.20: icmp_seq=5 ttl=64 time=0.179 ms
--- 10.20.19.20.acme.local ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4000ms
rtt min/avg/max/mdev = 0.129/0.174/0.237/0.038 ms
--interface
Specify an interface address to use as the source address by entering a value using the DR Series system CLI --
interface command option.
Example
network --ping --destination system-69 --interface bond0
network --blink
Description
The command blinks the LED on the specific ethernet device.
Syntax
network --blink --nwif <ethN> --time <N>
--nwif Eth interface to blink.
--time Blink duration time in seconds (default 10, max 300).
45