Manualshelf

Administrator Guide

ManualsBrandsDell ManualsConverged InfrastructureDR2000v
71727374757677787980
• Max Speed: 1000baseT/Full
• Duplex: Full
DR Series 시스템 암호 관리
DR Series 시스템에 로그인할 때 사용되는 로그인 암호를 다음 두 가지 방법으로 관리할 수 있습니다.
• System Configuration(시스템 구성) 페이지에서 Edit Password(암호 편집) 옵션을 사용하여 기존 로그인 암
호를 수정합니다. 자세한 내용은 시스템 암호 수정을 참조하십시오.
• DR Series System Login(DR Series 시스템 로그인) 페이지에서 Reset Password(암호 재설정) 옵션을 사용하
여 로그인 암호를 기본값으로 재설정합니다. 자세한 내용은 기본 시스템 암호 재설정을 참조하십시오.
Modifying the System Password
To configure a new password or to modify an existing password for logging in to the DR Series system, complete the
following:
1. To change the system password, do one of the following:.
– In the navigation panel, select System Configuration, the System Configuration page is displayed. Click
Password Management.
– In the navigation panel, select System Configuration → Password, the Password Management page is
displayed.
2. Click Edit Password.
The Edit Password dialog is displayed.
3. In Current password, type the current password for the system.
4. In New password, type the new system password.
5. In Confirm password, retype the new password to confirm this as the new password replacing the existing system
password.
6. Click Change Password (or click Cancel to display the System Configuration page).
If successful, a Password change was successful dialog is displayed.
Resetting the Default System Password
To reset the system to use the default password (St0r@ge! ) for logging in, complete the following:
1. In the Login window, click Reset Password.
The Reset Password dialog is displayed.
If the password reset option is set to Service Tag, proceed to step 2.
If the password reset option is set to Service Tag and Administrator Email, proceed to step 4.
2. In Service Tag, type the Service Tag associated with your system, and click Reset Password.
노트: If you are unsure of the Service Tag associated with your DR Series system, it can be found on the
Support page (click Support in the navigation panel to display the Support Information pane, which displays
the Service Tag).
The Login window is displayed, and a Password has been reset dialog is displayed.
3. To log in using the default password, type St0r@ge! , and click Login.
노트: After you have reset the login password to its default and logged in to the DR Series system, Dell
recommends for security reasons that you create a new unique login password.
73