Administrator Guide

스 파일로 업데이트됩니다. Number of Installed Licenses(설치된 라이센스 수) 창에는 ID, 설명, 권한 ID 및 현재 상

태별로 식별된 설치된 라이센스가 나열됩니다.

지원되는 데이터 스토리지 확장 선반 또는 확장 선반에 필요한 라이센스에 대한 자세한 내용은 확장 선반 라이

센스 및 확장 선반 설치를 참조하십시오.

Expansion Shelf Licenses

This topic introduces the license required for adding external data storage in the form of Dell MD1200 storage arrays

that are referred to as expansion shelf enclosures. Expansion shelf enclosures allow you to add supplemental data

storage capacity to support DR Series system operations. The DR Series system supports up to maximum of two

enclosures per system, and any expansion shelf enclosure that is added must be equal to or greater than each DR

Series system internal drive slot capacity (0–11). Expansion shelf enclosures can be added to the internal data storage

to create up to 9, 18, or 27 Terabyte (TB) hard drive capacities, and expansion shelf enclosures can be added in 1 TB, 2

TB, or 3 TB capacities. Licenses define the expansion shelf enclosure size in a license = size format (for example, shelf =

18TB), and licenses are added on a per-shelf basis.

표 4. Expansion Shelf Capacities in the DR Series System

System/Expansion Shelf Enclosure Size Maximum Data Storage Capacity Options

600 Gigabyte (GB) expansion shelf

• 9 TB

• 18 TB

• 27 TB

1 TB expansion shelf

• 9 TB

• 18 TB

• 27 TB

2 TB expansion shelf

• 18 TB

• 27 TB

3 TB expansion

• 27 TB

Licenses

Adding an expansion shelf enclosure requires that you order a license for each enclosure from a Dell Account

representative at the time that you order the DR Series system. You can also order this at a later date when you want to

add additional external storage to your base DR Series system. To obtain the license, you can download it from the

support.dell.com/ website using your service tag or use an email link from your Dell Account representative.

If you already have a Dell MD1200 storage array, the order process supports licensing for existing hardware that you

want to add to a base DR Series system. Each license supports one expansion shelf enclosure, and the system supports

up to two enclosures using the DR Series system service tag. Because the licenses are tied to the system service tag, if

the internal drives are moved to another system chassis, this would require a new license. For more information about

the expansion shelf enclosures, see “DR Series Expansion Shelf” in DR Series System and Data Operations.

노트: The 300 Gigabyte (GB) drive capacity (2.7 TB) version of the DR Series system does not support the addition

of expansion shelf enclosures to add external storage to the base system.

확장 선반 라이센스 추가

확장 선반의 라이센스의 위치를 찾은 후에 라이센스를 설치하고 유효성을 검사해야 합니다.

DR Series 시스템의 확장 선반 라이센스를 설치하려면 다음을 수행합니다.