Administrator Guide

알려진 정적 IP 주소를 사용하고 있는 경우 초기 시스템 구성 마법사 실행을 건너뛰고 해당 사용자 인터페이스
를 사용하여 DR Series 시스템을 직접 구성할 수 있습니다.
DR Series 시스템을 구성하려면 System Configuration(시스템 구성) → Networking(네트워킹) 을 선택하고 원하는
네트워킹 설정을 구성합니다. 자세한 내용은 네트워킹 설정 구성을 참조하십시오.
노트: 로그인 및 초기 시스템 구성 마법사 사용에 대한 자세한 내용은 네트워킹 설정 구성을 참조하십시오.
Local Console Connection
To configure a local console connection, you must make the following two rear chassis cable connections:
• VGA port and your video monitor
• USB port and your keyboard
To make local console cable connections for the DR4000 and DR4100 system appliances, complete the following:
1. (DR4000 system appliance) Locate the VGA monitor port and the USB ports on the back of your system. See Figure 3
for the VGA and USB port locations and complete steps 1 to 4. For the DR4100 system appliance, skip to step 5.
2. Connect the video monitor to the VGA port on the back of your system (see item 1 in the DR4000 System Rear
Chassis Port Locations table).
3. Connect the USB keyboard to one of the two USB ports on the back of your system (see item 3 in DR4000 System
Rear Chassis Port Locations table).
4. You are now ready to perform initialization using the DR Series system CLI login process. For more information, see
Logging in and Initializing the DR Series System.
그림 6 . DR4000 System Rear Chassis Port Locations
Item Indicator, Button, or Connector Icon Description
1 Video connector Connects a VGA display to the system.
2 iDRAC6 Enterprise port Dedicated management port for the iDRAC6
Enterprise card.
3 USB connectors (2) Connects USB devices to the system. The ports are
USB 2.0-compliant.
4 Ethernet connectors (2) Embedded 10/100/1000 NIC connectors.
5 Ethernet Connectors (2) on
expansion card
1-GbE/10-GbE/10-GbE SFP+ Ethernet Port
To make local console cable connections for the DR4100 system appliance, complete the following:
36