Administrator Guide
Table Of Contents
- Dell DR Series System Administrator Guide
- DR Series システムの概要
- Understanding the DR Series System
- About the DR Series System
- ドライブ容量と使用可能な物理容量
- Data Storage Terminology and Concepts
- Supported File System Protocols
- OpenStorage Technology (OST): DR Series System
- Rapid Data Storage (RDS): DR Series System
- DR Series System and Data Operations
- Supported Software and Hardware
- DR Series — Expansion Shelf Cabling
- DR Series システム拡張シェルフの追加
- Setting Up the DR Series System
- Interacting With the DR Series System
- Connections for Initializing a DR Series System
- DR Series システムの初期化
- RACADM を使用した iDRAC6/iDRAC7 へのアクセス
- Logging in Using a Web Interface
- Dashboard（ダッシュボード）ページとオプション
- Storage（ストレージ）ページとオプション
- About the Schedules Page and Options
- About the System Configuration Page and Options
- Support（サポート）ページとオプション
- Configuring the DR Series System Settings
- Managing DR Series Storage Operations
- DR Series システムの監視
- DR Series システムのサポートオプションの使用
- OST の設定と使用
- OST の理解
- OpenStorage Technology（OST）API
- OST ガイドライン
- OST Terminology
- Supported OST Software and Components
- OST Required Configurations
- ベストプラクティス：OST と DR Series システム
- クライアント側の最適化の設定
- Configuring an LSU
- Installing the Dell OST Plug-In
- NetBackup を使用した DR Series システム情報の設定
- Backing Up Data From a DR Series System (NetBackup)
- Using Backup Exec With a DR Series System (Windows)
- OST Plug-In and Supported Versions
- Installation Prerequisites for the OST Plug-In for Backup Exec
- Backup Exec GUI を使用した DR Series システムの設定
- Backup Exec を使用した DR Series システム上でのバックアップの作成
- Optimizing Duplication Between DR Series Systems Using Backup Exec
- Restoring Data from a DR Series System Using Backup Exec
- Understanding the OST CLI Commands
- Understanding OST Plug-In Diagnostic Logs
- Linux ユーティリティを使用した診断の収集
- メディアサーバー情報の収集に関するガイドライン
- Configuring and Using Rapid Data Storage
- RDS Overview
- RDS Guidelines
- Best Practices: RDS and the DR Series System
- Setting Client-Side Optimization
- Adding RDS Devices in NVBU
- Removing RDS Devices From NVBU
- Backing Up Data on the RDS Container Using NVBU
- Replicating Data to an RDS Container Using NVBU
- Restoring Data From a DR Series System Using NVBU
- Supported DR Series System CLI Commands for RDS
- Troubleshooting and Maintenance
- Supported Ports in a DR Series System
- 困ったときは
– Comments
– Notify me of DR4000 appliance alerts
– Notify me of DR4000 software updates
Password
The Password Management pane displays the current Reset Password Option set for the system. The Reset Password
Option can be:
• Service Tag Only
• Service Tag and Administrator Email
メモ: To select the option Service Tag and Administrator Email, you must first configure the e-mail relay
host and administrator contact e-mail.
In the Password Management pane you can edit the current password and edit the password reset options.
Email Relay Host
The Email Relay Host pane displays the current email relay host configured for the DR Series system. The Email Relay
Host pane title acts as a link to the Email Relay Host page:
• This page lists the configured email relay host by its IP address or hostname that is responsible for email in the
DR Series system. The Email Relay Host page provides the Add Relay Host option (which after you configure it,
this option changes to Edit Relay Host).
Date and Time
The Date and Time pane displays the current Mode configured for the DR Series system (Manual or NTP), the current
Time Zone, and the current Date and Time (in mm/dd/yy hh:mm:ss format, for example: 12/11/12 14:58:22 PST). The Date
and Time pane title acts as a link to the Date and Time page:
• This page contains a Settings pane that lists the Mode used. The system uses Network Time Protocol (NTP)
servers if the system is part of a workgroup and not joined to an Active Directory Services (ADS) domain. If the
system is joined to an ADS domain, then the NTP servers setting is disabled and the system uses the ADS
domain time. The Settings pane also displays the current Time Zone, and current Date and Time. The Date and
Time page provides the Edit option for changing the date and time settings.
メモ: Dell recommends using the Network Time Protocol (NTP) servers when the DR Series system is part of a
workgroup and not part of a domain. The NTP time mode is disabled when the DR Series system is joined to an
Active Directory Services (ADS) domain. Any attempt to enable the NTP time mode when you are joined to an ADS
domain displays an error message indicating this is not possible.
Understanding the System Configuration Page Options
The System Configuration page contains three key system options:
• Password Management
• Shutdown
• Reboot
Edit Password
Edit Password—click this option to display the Edit Password dialog, where you can change the login password for the
DR Series system
メモ: To change CIFS login credentials, you can use the DR Series system CLI command, authenticate –set –user .
For details, see the
Dell DR Series System Command Line Reference Guide
.
67