Administrator Guide
Table Of Contents
- Dell DR Series System Administrator Guide
- DR Series システムの概要
- Understanding the DR Series System
- About the DR Series System
- ドライブ容量と使用可能な物理容量
- Data Storage Terminology and Concepts
- Supported File System Protocols
- OpenStorage Technology (OST): DR Series System
- Rapid Data Storage (RDS): DR Series System
- DR Series System and Data Operations
- Supported Software and Hardware
- DR Series — Expansion Shelf Cabling
- DR Series システム拡張シェルフの追加
- Setting Up the DR Series System
- Interacting With the DR Series System
- Connections for Initializing a DR Series System
- DR Series システムの初期化
- RACADM を使用した iDRAC6/iDRAC7 へのアクセス
- Logging in Using a Web Interface
- Dashboard（ダッシュボード）ページとオプション
- Storage（ストレージ）ページとオプション
- About the Schedules Page and Options
- About the System Configuration Page and Options
- Support（サポート）ページとオプション
- Configuring the DR Series System Settings
- Managing DR Series Storage Operations
- DR Series システムの監視
- DR Series システムのサポートオプションの使用
- OST の設定と使用
- OST の理解
- OpenStorage Technology（OST）API
- OST ガイドライン
- OST Terminology
- Supported OST Software and Components
- OST Required Configurations
- ベストプラクティス：OST と DR Series システム
- クライアント側の最適化の設定
- Configuring an LSU
- Installing the Dell OST Plug-In
- NetBackup を使用した DR Series システム情報の設定
- Backing Up Data From a DR Series System (NetBackup)
- Using Backup Exec With a DR Series System (Windows)
- OST Plug-In and Supported Versions
- Installation Prerequisites for the OST Plug-In for Backup Exec
- Backup Exec GUI を使用した DR Series システムの設定
- Backup Exec を使用した DR Series システム上でのバックアップの作成
- Optimizing Duplication Between DR Series Systems Using Backup Exec
- Restoring Data from a DR Series System Using Backup Exec
- Understanding the OST CLI Commands
- Understanding OST Plug-In Diagnostic Logs
- Linux ユーティリティを使用した診断の収集
- メディアサーバー情報の収集に関するガイドライン
- Configuring and Using Rapid Data Storage
- RDS Overview
- RDS Guidelines
- Best Practices: RDS and the DR Series System
- Setting Client-Side Optimization
- Adding RDS Devices in NVBU
- Removing RDS Devices From NVBU
- Backing Up Data on the RDS Container Using NVBU
- Replicating Data to an RDS Container Using NVBU
- Restoring Data From a DR Series System Using NVBU
- Supported DR Series System CLI Commands for RDS
- Troubleshooting and Maintenance
- Supported Ports in a DR Series System
- 困ったときは
メモ: If you are running a DR4000 system with an installed release of system software prior to 2.1, and you intend
to upgrade to release 2.1 system software and install an external expansion shelf (or shelves), Dell recommends
that you observe the following best practice sequence of operations to avoid any issues:
• Upgrade the DR4000 system with the release 2.1 system software
• Power off the DR4000 system (required for 2.1 with Dell OpenManage 7.1)
• Connect the external expansion shelf (or shelves) with cabling to the DR4000 system
• Power on the external expansion shelf (or shelves)
• Power on the DR4000 system
メモ: If you install an expansion shelf enclosure to support a DR Series system, each shelf must use physical disks
that have a capacity equal to or greater than each DR Series system internal drive slot capacity (0–11) that they are
supporting.
図 2. DR4100 System Expansion Shelf (MD1200) Drive Slot Locations
Drive 0 (top) Drive 3 (top) Drive 6 (top) Drive 9 (top)
Drive 1 (middle) Drive 4 (middle) Drive 7 (middle) Drive 10 (middle)
Drive 2 (bottom) Drive 5 (bottom) Drive 8 (bottom) Drive 11 (bottom)
Understanding About Adding a DR Series Expansion Shelf
The 2.0 release of the DR Series system appliance allows you to connect up to two Dell PowerVault MD1200 data
storage expansion shelf enclosures to provide additional data storage capacity beyond the capacity of the basic DR
Series system. Supported data storage expansion shelves can be added in 1 Terabyte (TB), 2 TB, or 3 TB hard drive
capacities. The process for adding an expansion shelf requires the following:
メモ: The 300 Gigabyte (GB) drive capacity (2.7 TB) version of the DR Series system does not support the addition
of expansion shelf enclosures.
• Physically adding or installing the expansion shelf (for more information, see Adding a DR Series System
Expansion Shelf)
• Cabling the expansion shelf to the DR Series system (for more information, see DR Series System - Expansion
Shelf Cabling)
• Installing the license for an expansion shelf (for more information, see Installing an Expansion Shelf License)
Supported Software and Hardware
For a complete list of the latest supported software and hardware for the DR Series system, Dell recommends that you
see the
Dell DR Series System Interoperability Guide
at support.dell.com/manuals. For example, the
Dell DR Series
System Interoperability Guide
lists the following supported hardware and software categories:
29