Administrator Guide
Table Of Contents
- Dell DR Series System Administrator Guide
- DR Series システムの概要
- Understanding the DR Series System
- About the DR Series System
- ドライブ容量と使用可能な物理容量
- Data Storage Terminology and Concepts
- Supported File System Protocols
- OpenStorage Technology (OST): DR Series System
- Rapid Data Storage (RDS): DR Series System
- DR Series System and Data Operations
- Supported Software and Hardware
- DR Series — Expansion Shelf Cabling
- DR Series システム拡張シェルフの追加
- Setting Up the DR Series System
- Interacting With the DR Series System
- Connections for Initializing a DR Series System
- DR Series システムの初期化
- RACADM を使用した iDRAC6/iDRAC7 へのアクセス
- Logging in Using a Web Interface
- Dashboard(ダッシュボード)ページとオプション
- Storage(ストレージ)ページとオプション
- About the Schedules Page and Options
- About the System Configuration Page and Options
- Support(サポート)ページとオプション
- Configuring the DR Series System Settings
- Managing DR Series Storage Operations
- DR Series システムの監視
- DR Series システムのサポートオプションの使用
- OST の設定と使用
- OST の理解
- OpenStorage Technology(OST)API
- OST ガイドライン
- OST Terminology
- Supported OST Software and Components
- OST Required Configurations
- ベストプラクティス:OST と DR Series システム
- クライアント側の最適化の設定
- Configuring an LSU
- Installing the Dell OST Plug-In
- NetBackup を使用した DR Series システム情報の設定
- Backing Up Data From a DR Series System (NetBackup)
- Using Backup Exec With a DR Series System (Windows)
- OST Plug-In and Supported Versions
- Installation Prerequisites for the OST Plug-In for Backup Exec
- Backup Exec GUI を使用した DR Series システムの設定
- Backup Exec を使用した DR Series システム上でのバックアップの作成
- Optimizing Duplication Between DR Series Systems Using Backup Exec
- Restoring Data from a DR Series System Using Backup Exec
- Understanding the OST CLI Commands
- Understanding OST Plug-In Diagnostic Logs
- Linux ユーティリティを使用した診断の収集
- メディアサーバー情報の収集に関するガイドライン
- Configuring and Using Rapid Data Storage
- RDS Overview
- RDS Guidelines
- Best Practices: RDS and the DR Series System
- Setting Client-Side Optimization
- Adding RDS Devices in NVBU
- Removing RDS Devices From NVBU
- Backing Up Data on the RDS Container Using NVBU
- Replicating Data to an RDS Container Using NVBU
- Restoring Data From a DR Series System Using NVBU
- Supported DR Series System CLI Commands for RDS
- Troubleshooting and Maintenance
- Supported Ports in a DR Series System
- 困ったときは

システムイベントメッセージ
説明 / 意味または対処方法
Failure writing to data volume.(データボリュームへ
の書き込み失敗)
DR Series システムのメンテナンスベースの問題です。
Maintenance(メンテナンス)モードまたは DR Series シ
ステム CLI コマンドを使用してステータスを確認してく
ださい。必要に応じてデルサポートにお問い合わせく
ださい。
Checksum verification on metadata failed.(メタデー
タのチェックサム検証に失敗しました)
テクニカルサポートまたはファイルシステムの修正に
ついてデルサポートにお問い合わせください。修正に
ついては、「DR Series メンテナンスモードについて」を
参照してください。
Optimization engine log replay failed.(最適化エンジ
ンログリプレイに失敗しました)
テクニカルサポートまたはファイルシステムの修正に
ついてデルサポートにお問い合わせください。修正に
ついては、「DR Series メンテナンスモードについて」を
参照してください。
Decompression of datastore failed <
variable
>.(データ
ストアの解凍に失敗しました <変数>)
テクニカルサポートまたは修理についてデルサポート
にお問い合わせください。
Failed to clean active datastore <
variable
>.(アクティ
ブデータストア <変数> のクリーニングに失敗し
ました)
テクニカルサポートまたは修理についてデルサポート
にお問い合わせください。
Negative reference on datastore <
variable
>. Record
type: <
variable
>. Count: <
variable
>.(データストア <
変数> のネガティブリファレンス。レコードタイ
プ:<変数>。カウント:<変数>)
テクニカルサポートまたはファイルシステムの修正に
ついてデルサポートにお問い合わせください。修正に
ついては、「DR Series メンテナンスモードについて」を
参照してください。
Datastore <
variable
> contains negative stream
reference count. Record type: <
variable
>. Count:
<
variable
>.(データストア <変数> にはネガティブ
ストリームリファレンスカウントが含まれます。
レコードタイプ:<変数>。カウント:<変数>)
情報メッセージ。ユーザーの操作は必要ありません。
Datastore <
variable
> total reference count reached
threshold. Record type: <
variable
>. Count: <
variable
>.
(データストア <変数> の合計リファレンスカウ
ントがしきい値に達しました。レコードタイプ:
<変数>。カウント:<変数>)
情報メッセージ。ユーザーの操作は必要ありません。
Entering Maintenance mode due to failure in
processing logs.(ログ処理エラーのため
Maintenance(メンテナンス)モードに入ります)
テクニカルサポートまたは修理についてデルサポート
にお問い合わせください。
Failed to acquire optimizer pipeline. Error: <
variable
>.
(最適化パイプラインの取得に失敗しました。
エラー:<変数>)
テクニカルサポートまたは修理についてデルサポート
にお問い合わせください。
Failed to create optimizer event. Type: <
variable
>,
Error: <
variable
>.(最適化イベントの作成に失敗し
ました。タイプ:<変数>、エラー:<変数>)
テクニカルサポートまたは修理についてデルサポート
にお問い合わせください。
Task execution in fiber <
variable
> timed out after
<
variable
> milliseconds (ms). Restarting file server.(フ
ァイバ <変数> でのタスク実行が <変数> ミリ秒
ファイルシステムが再起動しました。診断ログファイ
ルバンドルを収集し、デルサポートへアップロードして
ください。
178