Administrator Guide
Table Of Contents
- Dell DR Series System Administrator Guide
- DR Series システムの概要
- Understanding the DR Series System
- About the DR Series System
- ドライブ容量と使用可能な物理容量
- Data Storage Terminology and Concepts
- Supported File System Protocols
- OpenStorage Technology (OST): DR Series System
- Rapid Data Storage (RDS): DR Series System
- DR Series System and Data Operations
- Supported Software and Hardware
- DR Series — Expansion Shelf Cabling
- DR Series システム拡張シェルフの追加
- Setting Up the DR Series System
- Interacting With the DR Series System
- Connections for Initializing a DR Series System
- DR Series システムの初期化
- RACADM を使用した iDRAC6/iDRAC7 へのアクセス
- Logging in Using a Web Interface
- Dashboard（ダッシュボード）ページとオプション
- Storage（ストレージ）ページとオプション
- About the Schedules Page and Options
- About the System Configuration Page and Options
- Support（サポート）ページとオプション
- Configuring the DR Series System Settings
- Managing DR Series Storage Operations
- DR Series システムの監視
- DR Series システムのサポートオプションの使用
- OST の設定と使用
- OST の理解
- OpenStorage Technology（OST）API
- OST ガイドライン
- OST Terminology
- Supported OST Software and Components
- OST Required Configurations
- ベストプラクティス：OST と DR Series システム
- クライアント側の最適化の設定
- Configuring an LSU
- Installing the Dell OST Plug-In
- NetBackup を使用した DR Series システム情報の設定
- Backing Up Data From a DR Series System (NetBackup)
- Using Backup Exec With a DR Series System (Windows)
- OST Plug-In and Supported Versions
- Installation Prerequisites for the OST Plug-In for Backup Exec
- Backup Exec GUI を使用した DR Series システムの設定
- Backup Exec を使用した DR Series システム上でのバックアップの作成
- Optimizing Duplication Between DR Series Systems Using Backup Exec
- Restoring Data from a DR Series System Using Backup Exec
- Understanding the OST CLI Commands
- Understanding OST Plug-In Diagnostic Logs
- Linux ユーティリティを使用した診断の収集
- メディアサーバー情報の収集に関するガイドライン
- Configuring and Using Rapid Data Storage
- RDS Overview
- RDS Guidelines
- Best Practices: RDS and the DR Series System
- Setting Client-Side Optimization
- Adding RDS Devices in NVBU
- Removing RDS Devices From NVBU
- Backing Up Data on the RDS Container Using NVBU
- Replicating Data to an RDS Container Using NVBU
- Restoring Data From a DR Series System Using NVBU
- Supported DR Series System CLI Commands for RDS
- Troubleshooting and Maintenance
- Supported Ports in a DR Series System
- 困ったときは
The Backup Exec Services Manager page is displayed.
2. Select the server on which you want to install the Dell OST plug-in, and select Stop all services.
The Restarting Backup Exec Services page is displayed, which lists the current status of services for the selected
server.
3. Click OK.
4. Launch the Dell Storage Plug-In for Symantec OST Setup Wizard (and accept all default values).
5. In the Welcome page, click Next to continue.
The End-User License Agreement page is displayed.
6. Click I accept the terms in the License Agreement, and click Next.
7. In the Destination Folder page, accept the default destination location, and click Next.
8. In the Ready to Install Dell Storage Plug-In for Symantec OST page, click Install.
When the plug-in has been installed, the Completed the Dell Storage Plug-In for Symantec OST Setup Wizard page
is displayed.
9. Click Finish to exit the wizard.
Installing the OST Plug-In for NetBackup on Windows
This topic describes how to install the Dell OST plug-in on a media server running the supported Microsoft Windows
server operating system software (and using the NetBackup DMA).
Ensure that you have downloaded the Dell OST plug-in installer into the correct directory on the designated media
server. The OST plug-in installer is saved as DellOSTPlugin64.msi, or DellOSTPlugin.msi (DellOSTPlugin64.msi is for 64-
bit operating systems and DellOSTPlugin.msi is for 32-bit operating systems). Ensure that the correct plug-in is
downloaded to support your 64-bit or 32-bit systems.
メモ: The Dell OST plug-in must be installed on client systems to support client-side deduplication.
1. Stop the NetBackup services if they are running, by using the following command:
Verify if a previous version is already installed. If it is, uninstall it. If SETUP performs this check, there is no need to
do it manually.
$INSTALL_PATH\VERITAS\NetBackup\bin\bpdown.exe
2. Run SETUP to install the OST plug-in.
3. Check that the plug-in is installed by using the following NetBackup command on the Windows media server:
$INSTALL_PATH\VERITAS\NetBackup\bin\admincmd\bpstsinfo.exe -pi
This NetBackup command lists the Dell OST plug-in details along with other plug-in details, as shown in the
following example:
– Plug-In Name: libstspiDellMT.dll
– Prefix: DELL
– Label: OST Plug-in that interfaces with the DR Series system
– Build Version: 9
– Build Version Minor: 1
– Operating Version: 9
– Vendor Version: Dell OST plug-in 10.1
4. Start the NetBackup services by using the following command:
$INSTALL_PATH\VERITAS\NetBackup\bin\bpup.exe
メモ: To more information about uninstalling the Dell OST plug-in, see Uninstalling the Dell OST Plug-In for
Windows.
136