Administrator Guide
Table Of Contents
- Dell DR Series System Administrator Guide
- DR Series システムの概要
- Understanding the DR Series System
- About the DR Series System
- ドライブ容量と使用可能な物理容量
- Data Storage Terminology and Concepts
- Supported File System Protocols
- OpenStorage Technology (OST): DR Series System
- Rapid Data Storage (RDS): DR Series System
- DR Series System and Data Operations
- Supported Software and Hardware
- DR Series — Expansion Shelf Cabling
- DR Series システム拡張シェルフの追加
- Setting Up the DR Series System
- Interacting With the DR Series System
- Connections for Initializing a DR Series System
- DR Series システムの初期化
- RACADM を使用した iDRAC6/iDRAC7 へのアクセス
- Logging in Using a Web Interface
- Dashboard（ダッシュボード）ページとオプション
- Storage（ストレージ）ページとオプション
- About the Schedules Page and Options
- About the System Configuration Page and Options
- Support（サポート）ページとオプション
- Configuring the DR Series System Settings
- Managing DR Series Storage Operations
- DR Series システムの監視
- DR Series システムのサポートオプションの使用
- OST の設定と使用
- OST の理解
- OpenStorage Technology（OST）API
- OST ガイドライン
- OST Terminology
- Supported OST Software and Components
- OST Required Configurations
- ベストプラクティス：OST と DR Series システム
- クライアント側の最適化の設定
- Configuring an LSU
- Installing the Dell OST Plug-In
- NetBackup を使用した DR Series システム情報の設定
- Backing Up Data From a DR Series System (NetBackup)
- Using Backup Exec With a DR Series System (Windows)
- OST Plug-In and Supported Versions
- Installation Prerequisites for the OST Plug-In for Backup Exec
- Backup Exec GUI を使用した DR Series システムの設定
- Backup Exec を使用した DR Series システム上でのバックアップの作成
- Optimizing Duplication Between DR Series Systems Using Backup Exec
- Restoring Data from a DR Series System Using Backup Exec
- Understanding the OST CLI Commands
- Understanding OST Plug-In Diagnostic Logs
- Linux ユーティリティを使用した診断の収集
- メディアサーバー情報の収集に関するガイドライン
- Configuring and Using Rapid Data Storage
- RDS Overview
- RDS Guidelines
- Best Practices: RDS and the DR Series System
- Setting Client-Side Optimization
- Adding RDS Devices in NVBU
- Removing RDS Devices From NVBU
- Backing Up Data on the RDS Container Using NVBU
- Replicating Data to an RDS Container Using NVBU
- Restoring Data From a DR Series System Using NVBU
- Supported DR Series System CLI Commands for RDS
- Troubleshooting and Maintenance
- Supported Ports in a DR Series System
- 困ったときは
• ナビゲーションパネルを使用して、Support → Software Upgrade（サポート > ソフトウェアアップグレ
ード）を選択します。
どちらの方法でも、Software Upgrade（ソフトウェアアップグレード）ページが表示され、このページのオプ
ションを使用して、現在インストールされているバージョンの確認、以前にインストールされたソフトウェ
アバージョンのアップグレード履歴の確認、iDRAC IP アドレス（使用中の場合）の確認、アップグレードプ
ロセスの開始、または DR Series システムの再起動を行うことができます。
メモ: DR Series システムソフトウェアアップグレード中、ソフトウェアアップグレードプロセス時間の
大部分でアップグレードステータス「starting（開始中）」が表示されたままになります。DR Series シス
テムアップグレードステータスが「almost done（もうすぐ終了）」に変わるまでは、システムアップグ
レードプロセスは完全に完了しません。
Verifying the Current Software Version
To verify the currently installed version of the DR Series system software, complete the following:
メモ: You can verify the version of the installed DR Series system software in the Dashboard page (in the System
Information pane), the Support page (in the Support Information pane), and the Software Upgrade page (in the
Software Information pane).
The following procedure documents the process from the Software Upgrade page.
1. In the navigation panel, select Support and click Software Upgrade (or select Support→ Software Upgrade).
The Software Upgrade page is displayed.
2. Verify the currently installed DR Series system software version listed as Current Version in the Software
Information pane (all previously installed versions are listed under Upgrade History, showing the version number
and timestamp when installed).
Upgrading the DR Series System Software
To upgrade the DR Series system software, complete the following:
メモ: The DR Series system only supports the copying of upgrade images and diagnostics files to and from the
system using WinSCP. The DR Series system does not support the copying or deleting of any other file types using
WinSCP. To use WinSCP to copy DR Series software upgrade and diagnostics log files, ensure that the File
Protocol mode is set to SCP (Secure Copy) mode.
メモ: You can use other SCP tools with the DR Series system, but you cannot use these other SCP tools to copy
other types of files to or from the DR Series system.
1. Using the browser, go to support.dell.com, navigate to the DR4000 product page, and enter your service tag.
2. In the Dell DR Series Drivers & Downloads page, click Find Drivers & Downloads.
The Drivers & Downloads page displays a listing of downloadable firmware, utilities, applications, and drivers for
the DR Series system.
3. Locate the IDM section of the Drivers & Downloads page, which includes the Dell-Utility (DR Series Upgrade File) in
the format, DR4x00-x.x.x.x-xxxxx.tar.gz, and showing its release date and version.
4. Click Download File, click For Single File Download via Browser, and click Download Now.
The File Download dialog is displayed.
5. Click Save to download the latest system software upgrade file to the DR Series system that is running the browser
session started by the DR Series administrator.
6. Using the DR Series system GUI, select Support, and click the Software Upgrade link (or select Support →
Software Upgrade).
The Software Upgrade page is displayed.
123