Administrator Guide
Modifying the System Password
To configure a new password or to modify an existing password for logging in to the DR Series system, complete the
following:
1. To change the system password, do one of the following:.
– In the navigation panel, select System Configuration, the System Configuration page is displayed. Click
Password Management.
– In the navigation panel, select System Configuration → Password, the Password Management page is
displayed.
2. Click Edit Password.
The Edit Password dialog is displayed.
3. In Current password, type the current password for the system.
4. In New password, type the new system password.
5. In Confirm password, retype the new password to confirm this as the new password replacing the existing system
password.
6. Click Change Password (or click Cancel to display the System Configuration page).
If successful, a Password change was successful dialog is displayed.
Modifying Password Reset Options
To modify the password reset options:
1. Select System Configuration → Password.
The Password Management page is displayed.
2. Click Edit Password Reset Options.
The Edit Password Reset Options dialog is displayed.
3. To use service tag only, select Service Tag Only and click Submit.
ANMERKUNG: To select the option Service Tag and Administrator Email, you must first configure the e-mail
relay host and administrator contact e-mail.
4. To use the service tag and administrator e-mail, select Service Tag and Administrator Email.
The optional security questions area is displayed.
5. To set the optional security questions, under Optional Security Question 1 and Optional Security Question 2 in
Question enter the security question.
6. In Answer , enter the answer to your security question.
ANMERKUNG: Save the answer in a secure location, you will need these answers to reset the DR Series
system password.
7. Click Submit.
Konfigurieren eines E-Mail-Relay-Hosts
Bei Bedarf können Sie einen externen E-Mail-Relay-Host für Ihr DR Series-System konfigurieren, wenn das Netzwerk-E-
Mail-System einen solchen erfordert. Beim Mail-Relay-Host handelt es sich in der Regel um einen externen Mailserver,
der E-Mail-Benachrichtigungen vom DR Series-System an die konfigurierten Empfänger-E-Mail-Adressen weiterleitet.
Klicken Sie dazu auf der Seite Email Relay Host (E-Mail-Relay-Host) auf Add Relay Host (Relay-Host hinzufügen), um
einen neuen E-Mail-Relay-Host zu definieren. Um einen vorhandenen E-Mail-Relay-Host zu bearbeiten, klicken Sie in der
87