Administrator Guide

The Login window is displayed, and a Password has been reset dialog is displayed.
3. To log in using the default password, type St0r@ge! , and click Login.
ANMERKUNG: After you have reset the login password to its default and logged in to the DR Series system,
Dell recommends for security reasons that you create a new unique login password.
4. In Service Tag, type the Service Tag associated with your system.
ANMERKUNG: If you are unsure of the Service Tag associated with your DR Series system, it can be found on
the Support page (click Support in the navigation panel to display the Support Information pane, which
displays the Service Tag).
5. In Administrator Email enter the email address of the administrator of this system.
The Administrator Email that you enter must match the administrator email address configured in the DR Series
system. If you have set security questions, the security questions are displayed.
6. Enter the answers to the configured security questions in Answer 1 and Answer 2.
7. Click Send Now.
An email with a unique code, used to reset the password, is sent only to the configured administrator email
address. The code is valid for only 15 minutes. The password rest code expires after 15 minutes and cannot be
used. You must repeat the password reset procedure to regenerate the code again.
Herunterfahren des DR Series-Systems
Bei Bedarf können Sie das DR Series-System mithilfe der Option Shutdown (Herunterfahren) der Seite System
Configuration (Systemkonfiguration) herunterfahren. Sie sollten sich jedoch über die Auswirkungen auf die
Systemvorgänge bewusst sein, bevor Sie das System herunterfahren.
VORSICHT: Durch die Option „Shutdown“ (Herunterfahren) wird das Gerät, auf dem die Systemsoftware installiert
ist, ausgeschaltet. Wenn sich das Gerät im ausgeschalteten Zustand befindet, können Sie es entweder über den
physischen Speicherort oder mithilfe einer iDRAC-Verbindung zum System wieder einschalten.
Gehen Sie folgendermaßen vor, um Ihr DR Series-System herunterzufahren:
1. Wählen Sie im Navigationsfeld System Configuration (Systemkonfiguration) aus.
Die Seite System Configuration (Systemkonfiguration) wird angezeigt.
2. Klicken Sie in der Optionsleiste der Seite System Configuration (Systemkonfiguration) auf Shutdown
(Herunterfahren).
Das Dialogfeld Shutdown confirmation (Herunterfahren bestätigen) wird angezeigt.
3. Klicken Sie auf Shutdown System (System herunterfahren), um das Herunterfahren des Systems fortzusetzen (oder
klicken Sie auf Cancel (Abbrechen), um zur Seite System Configuration (Systemkonfiguration) zurückzukehren).
Neustarten des DR Series-Systems
Bei Bedarf können Sie das DR Series-System mithilfe der Option Reboot (Neustarten) der Seite System Configuration
(Systemkonfiguration) neustarten. Gehen Sie dabei folgendermaßen vor:
1. Wählen Sie im Navigationsfeld System Configuration (Systemkonfiguration) aus.
Die Seite System Configuration (Systemkonfiguration) wird angezeigt.
2. Klicken Sie in der Optionsleiste der Seite System Configuration (Systemkonfiguration) auf Reboot (Neustarten).
Das Dialogfeld Reboot System confirmation (Systemneustart bestätigen) wird angezeigt.
80