Administrator Guide

– In the navigation panel, select System Configuration → Password, the Password Management page is
displayed.
2. Click Edit Password.
The Edit Password dialog is displayed.
3. In Current password, type the current password for the system.
4. In New password, type the new system password.
5. In Confirm password, retype the new password to confirm this as the new password replacing the existing system
password.
6. Click Change Password (or click Cancel to display the System Configuration page).
If successful, a Password change was successful dialog is displayed.
Modifying Password Reset Options
To modify the password reset options:
1. Select System Configuration → Password.
The Password Management page is displayed.
2. Click Edit Password Reset Options.
The Edit Password Reset Options dialog is displayed.
3. To use service tag only, select Service Tag Only and click Submit.
注: To select the option Service Tag and Administrator Email, you must first configure the e-mail relay host
and administrator contact e-mail.
4. To use the service tag and administrator e-mail, select Service Tag and Administrator Email.
The optional security questions area is displayed.
5. To set the optional security questions, under Optional Security Question 1 and Optional Security Question 2 in
Question enter the security question.
6. In Answer , enter the answer to your security question.
注: Save the answer in a secure location, you will need these answers to reset the DR Series system
password.
7. Click Submit.
配置电子邮件中继主机
如果需要，可以将外部电子邮件中继主机配置为向 DR Series 系统提供服务（如果网络电子邮件系统需要一个
中继主机）。电子邮件中继主机通常是外部邮件服务器，可将任何电子邮件警报从 DR Series 系统中继到指定
的每个收件人电子邮件地址。
要在 Email Relay Host（电子邮件中继主机）页面上执行此操作，请单击 Add Relay Host（添加中继主机）定义
新的电子邮件中继主机（或者，要编辑现有电子邮件中继主机，请单击选项栏上的 Edit Relay Host（编辑中继
主机））。有关编辑现有电子邮件中继主机的更多信息，请参阅编辑电子邮件中继主机。
添加电子邮件中继主机
要为 DR Series 系统配置新的电子邮件中继主机，请完成以下操作：
注: 要编辑现有电子邮件中继主机，请参阅编辑电子邮件中继主机。
1. 选择 System Configuration（系统配置） → Email Relay Host（电子邮件中继主机） 。
80