Administrator Guide

表. 3: Supported OST or RDS Client Modes and Settings
OST or RDS Client
Mode Settings
32–Bit OST or RDS
Client (4 or more
CPU cores)
64–Bit OST or RDS
Client (4 or more
CPU cores)
32–Bit OST or RDS
Client (Less than 4
CPU cores)
64–Bit OST or RDS
Client (Less than 4
CPU cores)
Auto Passthrough Dedupe Passthrough Passthrough
Dedupe Not Supported Supported Not Supported Not Supported
Passthrough Supported Supported Supported Supported
注: Click Select to identify the OST or RDS client on which you want to perform an action. For example, click Select
→ Download Plug-In to display the Download Plug-Ins page for the client you selected. Select the plug-in for the
relevant client and protocol.
About the Schedules Page and Options
To display the Schedules page, click Dashboard → Schedules . This page displays any existing Replication or Cleaner
operations that have been set up for the DR Series system. If no times are listed, this indicates there are no scheduled
Replication or Cleaner operations. The Replication and Cleaner operations will automatically run whenever the DR
Series system detects a window of inactivity when there are no other major system operations running.
注: Replication schedules can only be set on individual replication-enabled source containers.
The Schedules page lets you create a new schedule for running Replication or Cleaner operations, or you can modify an
existing schedule for either of these operations. For more information about scheduling Replication or Cleaner
operations, see Creating a Cleaner Schedule and Creating a Replication Schedule.
注: Cleaner operations are system processes that reclaim disk space from containers where files were deleted.
When no Cleaner schedule is set, the Cleaner process will run as needed.
The Schedules page displays the following:
• System Time Zone: using the following format (US/Pacific, Tue May 1 10:33:45 2012)
• Scheduled Replication operations: with day of the week (Sunday through Saturday), start time, and stop time
• Scheduled Cleaner operations: with day of the week (Sunday through Saturday), start time, and stop time
注: Schedules only control the source container in scheduled Replication operations; the target container is
passive in these operations.
设置复制计划
要通过 Schedules（计划）页面设置复制计划，请完成以下操作：
注: 只能在单个启用复制的源容器上设置复制计划。
注: 从 2.0 版开始，DR Series 系统软件包含了版本检查功能，它限制只能与运行相同系统软件版本的其他
DR Series 系统进行复制（运行 2.0.x 版软件的 DR Series 系统只能与运行相同版本系统软件的其他 DR Series
系统进行复制）。例如，2.0.x 版的系统不能与 2.1 或 3.0 版的系统进行复制，但可以与运行 2.0.0.1 或 2.0.0.2
版的系统进行复制。
1. 单击选项栏上的 Replication（复制），此时将显示 Replication Schedule（复制计划）页面。
另一种显示 Replication Schedule（复制计划）页面的方法是，单击 Schedules（计划）→ Replication
Schedule（复制计划）。
2. 在 Container（容器）的下拉列表中，选择一个已启用复制的源容器。
60