Administrator Guide

如果使用已知静态 IP 地址，可跳过运行 Initial System Configuration Wizard（初始系统配置向导），而直接使用

DR Series 系统的用户界面配置 DR Series 系统。

要配置 DR Series 系统，请选择 System Configuration（系统配置） → Networking（网络），并根据需要配置网

络设置。有关更多信息，请参阅配置网络设置。

注: 有关登录和使用 Initial System Configuration Wizard（初始系统配置向导）的详情，请参阅配置网络设

置。

Local Console Connection

To configure a local console connection, you must make the following two rear chassis cable connections:

• VGA port and your video monitor

• USB port and your keyboard

To make local console cable connections for the DR4000 and DR4100 system appliances, complete the following:

1. (DR4000 system appliance) Locate the VGA monitor port and the USB ports on the back of your system. See Figure 3

for the VGA and USB port locations and complete steps 1 to 4. For the DR4100 system appliance, skip to step 5.

2. Connect the video monitor to the VGA port on the back of your system (see item 1 in the DR4000 System Rear

Chassis Port Locations table).

3. Connect the USB keyboard to one of the two USB ports on the back of your system (see item 3 in DR4000 System

Rear Chassis Port Locations table).

4. You are now ready to perform initialization using the DR Series system CLI login process. For more information, see

Logging in and Initializing the DR Series System.

图 6: DR4000 System Rear Chassis Port Locations

Item Indicator, Button, or Connector Icon Description

1 Video connector Connects a VGA display to the system.

2 iDRAC6 Enterprise port Dedicated management port for the iDRAC6

Enterprise card.

3 USB connectors (2) Connects USB devices to the system. The ports are

USB 2.0-compliant.

4 Ethernet connectors (2) Embedded 10/100/1000 NIC connectors.

5 Ethernet Connectors (2) on

expansion card

1-GbE/10-GbE/10-GbE SFP+ Ethernet Port

To make local console cable connections for the DR4100 system appliance, complete the following: