White Papers

6 Setting Up the Dell™ DR Series System on Symantec™ Backup Exec™ | April 2015
1 Installing and configuring the DR Series system
1. Rack and cable the DR Series appliance, and power it on.
In the
Dell DR Series System Administrator Guide , refer to the sections, “iDRAC Connection”,
“Logging in and Initializing the DR Series System”, and “Accessing IDRAC6/Idrac7 Using RACADM” for
information about using iDRAC connection and initializing the system.
2. Log on to iDRAC using the default address 192.168.0.120, or the IP address that is assigned to the
iDRAC interface, with the user name and password of “root/calvin”.
3. Launch the virtual console.