White Papers

41 Setting Up the Dell™ DR Series System on Symantec™ Backup Exec™ | April 2015
Alternatively you can use the “vtl –update_carts” cli command for this operation. For example:
> vtl –update_carts --name TEST_VTL_LALA –add –no_of_tapes 10
Created 10 cartridges
3.6 Configuring the DR Series system VTL in Backup Exec
Before you configure the DR Series system VTL in Backup Exec, you need to present the DR Series system
VTL to the Windows host through iSCSI. See the preceding section, “Configuring the iSCSI target –
Windows” for more information.
After the DR Series system VTL has been connected to the Windows host running Backup Exec, do the
following steps.
1. Restart Backup Exec Services to discover the newly attached VTL container.
2. Go to the Storage tab to monitor the VTL discovery.
'