White Papers

5 Setting up the Dell DR Series System with IBM Tivoli Storage Manager
1 Installing and configuring the DR Series system
1. Rack and cable the DR Series system, and power it on.
In the
Dell DR Series System Administrator Guide , refer to the sections “iDRAC Connection”,
“Logging in and Initializing the DR Series System”, and “Accessing IDRAC6/Idrac7 Using RACADM”
for information about using the iDRAC connection and initializing the appliance.
2. Log on to iDRAC using the default address 192.168.0.120 or the IP address that is assigned to the
iDRAC interface with the user name and password: root/calvin. Launch the virtual console.
3. After the virtual console is open, log on to the system as the user administrator with the password
St0r@ge! (The “0” in the password is the numeral zero).
4. Set the user-defined networking preferences.