White Papers

37 Setting Up the Dell™ DR Series System on HP Data Protector® 7.0 | April 2015
B Creating a storage device for NFS
For NFS backup using the HP Data Protector, a target folder needs to be created as NFS share directory.
This is the location to which backup objects will be written. This is not required while adding CIFS share.
1. Mount the DR Series System NFS share onto the NFS share directory which backup objects will be
written in the HP Data Protector environment.
2. Verify the NFS share. One way is to try using the Linux command “cat /proc/mounts”. The rsize
and wsize of the nfs mount should be 512K.