Release Notes

5. Right-click the disk and select Change drive letter and paths.

6. Click Add.

7. Select Mount in the NTFS folder.

8. Paste the path copied in step 2.

9. To remove File_X, edit the path. (For example, if the path of the repository is

C:\DLDisks\Repository 1\disk_1234567890\File_0, you have to change it to C:

\DLDisks\Repository 1\disk_123456790)

10. Click OK.

11. Repeat for all the repository paths that you can see in step 2 if they differ.

Ignore the File_X number, if the rest of the path is the same, you do not have

to repeat this step.

12. After all failed repository paths are restored, go to Configuration →

Repositories tab, and click check repository.

When remounting volumes on the Provisioning page a

new job with an error status is created

Description On remounting volumes on the Provisioning page a new job with an error status is

created. This issue occurs after rebooting the appliance from a Rapid Appliance

Self Recovery (RASR) USB drive and performing a factory reset.

Workaround/

Solution

Remove all USB drives when provisioning.

AppAssure Core upgrade fails when performed manually

Description This issue occurs when trying to upgrade the Core outside the Recovery and

Update Utility (RUU) process.

Workaround/

Solution

Before performing the Core update, stop the following services:

• Dell Storage Management Web Service

• DSM SA Connection Service

• DSM SA Data Manager

• DSM SA Event Manager

• DSM SA Shared Services

Restart the services after the update.

Unable to recover the Appliance with Windows Recovery

Wizard when booting from a USB drive

Description When a USB drive is formatted as a RASR USB drive, the appliance does not

recognize the USB drive and displays it as a Fixed Disk in the operating system.

Workaround/

Solution

Do not use any USB drives that shows up as a Fixed Disk in the operating system.